Honda Fit/Jazz - DTC Troubleshooting: 2-3
Mercury Outboards Service ManualsHigh Quality Online manuals, fast download
DTC Troubleshooting: 2-3
| DTC 2-3: | Short to Another Wire or Decreased Resistance in Front Passenger's Airbag Inflator |
Special Tools Required
SRS inflator simulator( 07SAZ-TB4011A)
Erase the DTC memory.
| 2. | Turn the ignition switch ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off. Does the SRS indicator stay on? YES - Go to Go to Troubleshooting Intermittent Failures. |
| 3. | Turn the ignition switch OFF. Disconnect the battery negative cable, and wait for 3 minutes. |
| 4. | Disconnect the P1o connector from the P1i connector (A). Install the special tool (070AZ-SAA0100) to No. 9 and No. 10 terminals of the U1o connector. |
| 13. | Check resistance between the A and B terminals of the SRS simulator lead C (special tool). There should be 1 MW or more.  Is the resistance as specified? YES - Replace the SRS unit.n NO - Replace the dashboard wire harness.n |
Mercury Outboards Service ManualsHigh Quality Online manuals, fast download
