Tailgate Adjustment
Remove the support strut from each side.
Quarter pillar trim, both sides.
Rear center seat belt retractor cover.
| 3. | Remove the nuts (A), then remove the child anchor nuts (B) from both sides.
|
| 4. | Slightly loosen each screw and nut.
|
| 5. | Adjust the tailgate (C) alignment in the following sequence.
- Adjust the tailgate hinges (D) right and left, as well as forward and rearward, using the elongated holes.
- Turn the tailgate edge cushions (E), in or out as necessary, to make the tailgate, fit flush with the body at the side edges.
- Adjust the fit between the tailgate and tailgate opening by moving the striker (F).
 |
| 6. | Tighten each screw and nut securely.
|
| 7. | Check that the tailgate opens properly and locks securely.
|
| 8. | Apply touch-up paint to the hinge mounting bolts and around the hinges.
|
| 9. | Reinstall the support struts securely.
|
| 10. | Grease the pivot portion of the tailgate hinges as indicated by the arrows.
 |
| 11. | Reinstall all remaining removed parts.
|
Honda Fit/Jazz 02-05 Workshop Manual
Back to all Manuals
