DIY     OBD-II Codes     Auto Repair     Repair Manuals     -Forum-

Advertisement  [ ? ]

Site Links

I have mice in my roof and need a manual to tear off the inner liner.

Car: Acura, MDX, 2002, 3.5L     -    Back to Fix-It    -    Acura Repair Manuals

Q.I have mice in my roof and need a manual to tear off the inner liner. What is the best way to get this. thks

Answer This is the best information I have available, print the diagrams as they will time out
Headliner Removal/Installation
NOTE:
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not to bend and scratch the headliner.
Be careful not to damage the dashboard and other interior trim.
Remove these items
Front door opening trim, both sides as necessary
A-pillar trim, both sides
Rear door opening trim, both sides as necessary
Front seat belt upper anchor bolt, both sides
B-pillar upper trim, one side
Remove these items
Second row seat belt upper anchor bolt, both sides
C-pillar trim, one side
Third row seat belt upper anchor bolt, both sides
D-pillar trim, both sides
Remove the ET screws, then remove the sunvisor (A) and holder (B) from each side. Disconnect the vanity mirror light connectors (C).
Remove the roof console.
Remove the lens (A).
Remove the screws.
Pull out the roof console (B), and disconnect the front individual map light connector (C).
Remove the caps (A), and remove the ET screws, then remove the grab handles (B) (driver's, passenger's and second row passenger's).
Remove the center second row seat belt cover.
Remove the rear individual map lights.
Remove the ET screws, then remove the separation net cap (A), both sides.
Remove the screws, then remove the coat hangers (A), both sides.
Remove the rear ceiling light (for some models).
If equipped, detach the clips and remove the rear roof speaker grille (A).
Remove the headliner:
Remove the upper portion of the B-pillar trim (A) , and C-pillar trim (B) from one side of the vehicle .
For moonroof model: Remove the socket plug (C)and roof trim (D).
With help of an assistant, detach the clips, and lower the headliner (E) on the side you removed the pillar trim.
Remove the headliner through the tailgate opening.
Install the headliner in the reverse order of removal, and note these items:
When reinstalling the headliner through the tailgate opening, be careful not to fold or bend it. Also, be careful not to scratch the body.
For moonroof model: When reinstalling the roof trim, center the joining ends at the rear of the moonroof frame.
If the threads on a visor or separation net cap mounting ET screw are worn out, use an oversized screw made specifically for this application.
Visor mounting ET screws: P/N 90137-S30-0030 Separation net cap mounting ET screws: P/N 90137-S3V-A010
Check that both sides of the headliner are securely attached to the trim.
Mothballs do a pretty good job of keeping the rodents out but they do stink also

>>Contribute your Answer<<     -     Submit your Question