Honda Fit/Jazz - Blower Unit Removal and Installation
Place your banner in PDF ManualTry if FREE Today!
Blower Unit Removal and Installation
NOTE: LHD type is shown, RHD type is symmetrical.3. | Disconnect the connector (A) from the blower motor, then remove the mounting bolt, the self-tapping screws, and the bracket (B). |
4. | Remove the clip (A). Remove the mounting bolt, the screws, and the bracket (B). Remove the connector clip (C). Remove the self-tapping screws and the blower unit (D). |
5. | Install the unit in the reverse order of removal. Make sure that there is no air leakage. |
Place your banner in PDF ManualTry if FREE Today!